Product guide
Hayward navigator vacuum hose
Compatibility
The Hayward Navigator uses suction-side hoses that connect your pool skimmer to the cleaner. Genuine Hayward hoses and quality aftermarket options both work well. The Navigator is compatible with standard 40" hose sections.
How to Verify Fit
- Standard suction hose diameter: 1.5" (38mm)
- Twist-lock connectors should engage with a quarter turn
- Hose sections are typically 40" (1 meter) each
- Male and female ends should be free of cracks
Common Mistakes to Avoid
- Using pressure-side cleaner hoses (incompatible fitting type)
- Getting hose length wrong - too short reduces coverage, too long causes tangling
- Not replacing the leader hose (weighted section) when worn
- Ignoring cracked connectors which cause air leaks
When to Replace
Hayward Navigator hoses last 2-4 years with normal use. Replace when connectors crack, hoses become stiff or kinked, or you notice reduced suction at the cleaner.
Buying Tips
Aftermarket hoses work well and cost less than OEM. Buy extra connector pieces as spares - they crack before hoses wear out. Consider a hose kit with leader hose if doing a full replacement. Check compatibility with your specific Navigator model.
Where to Buy
Find compatible replacement parts from these retailers:
Frequently Asked Questions
How long should my Navigator hose be?
Total hose length should reach from your skimmer to the farthest point of your pool, plus about 3 feet of slack. Measure your pool diagonally and add 3 feet.
Are Navigator hoses universal?
Hayward Navigator hoses are Verify compatibility with your specific Navigator model. Check connector style before buying.
What's the leader hose?
The leader hose is the first section that connects directly to the cleaner. It's weighted to keep the cleaner on the pool floor. Replace it along with your regular hoses.